—
A green pool is something that any pool owner wants to avoid since it usually means a dirty pool with algae problems. But going green also means turning your pool into an eco-friendly backyard oasis.
Installing a pool on your property can significantly increase its value. However, it does come with issues that may worry you if you’re conscious about the environment. These include chemical usage, wasting water, and energy employed in heating its water.
Fortunately, with the advancement in technology, there are many ways on how you can make your swimming pool more eco-friendly and better for your health. By following the simple tips and advice we have here, you can make your pool less harmful to the environment while saving money at the same time.
Make The Switch To Greener Pool Cleaner
How you clean your pool can significantly impact on its ecological consequences because it involves the use of chemicals. Pool chemicals like chlorine can be damaging to the environment. Likewise, it can have a negative impact on the surrounding nature in your area.
A robotic pool vacuum cleaner is one of the most eco-friendly options you have. It reduces the need to use harsh chemicals, making it safer for the surrounding environment. What’s more, it works autonomously. This means the device will not rely on your pool system to run.
In comparison to other types of cleaners, a robovac will not use as much electricity to sanitize your pool, making it more economical. Furthermore, these machines have a built-in filter for gathering debris, which, in turn, reduces the need to perform backwashes or apply chemicals.
On top of that, these cleaning machines are very smart and armed with several advanced features. So if you want a sustainable, greener pool cleaning experience, robovac is the way to go. Make sure to check out the great selection of automatic pool robots on Cleanup.Expert when looking for the best robotic cleaner on the market.
Invest In A Solar Pool Heater
Installing a heater lets you enjoy your pool for many months and not only during the summer. And you can do so while conserving energy at the same time. The solution? A solar-powered pool heater. Although the initial investment is a bit steep, it will pay for itself in the long run.
Solar heating lets you use your swimming pool to its full potential. It harnesses the power of the sun. Hence, you’ll save both energy and money on your monthly electricity bill. Keep in mind that the sun’s heat is renewable and always free.
Use A Variable Speed Pump
Pumps are usually one of the major energy consumers out of all your pool equipment. So if you want to lower down your energy consumption, it’s a good idea to switch from an ordinary pump to a variable speed pump.
These pool pumps will only use the required energy for the task at hand they need to complete. Furthermore, they are more energy-efficient in comparison to a single-speed pump.
Always Keep Your Pool Covered
Once the pool season is over or you have no plans of using it for a while, make sure to cover it to prevent loss of water because of evaporation. Swimming pools lose approximately one-fourth inches of water each day due to this natural cycle, which is worst during sunny days. The last thing you want is to pump gallons of water into it constantly and apply more chemicals to compensate for the lost water.
When you use a pool cover, you can reduce water evaporation for as much as 95%. Additionally, using it during active seasons will keep filth and other particles at bay, reducing your pool maintenance cost. What’s more, it’ll prevent the pool heater from working overtime when you’re not using your pool.
Install A Pool Pump Timer
The pool pump is a vital component of your pool’s filtration system that circulates and drives water through it. This is what will keep your pool debris and dirt-free, as well as prevent algae buildup. Using a pool timer is an eco-friendly solution since it can turn your pump on and off at certain times rather than operate the entire day. This helps save energy. Also, you can even set it to run your pool pump when you’re away over the weekend.
Check For Any Leaks
Even the smallest leak can cause you to lose thousands of gallons of water over time. Aside from that, leaks can weaken the structure of your beautiful swimming pool. Usually, this ends up with costly repairs down the road.
The easiest way to determine if your pool has a leak is to mark its waterline. Then, check after 24 hours if there are significant changes in the water level.
Use Energy-Efficient Lighting
You have a wide variety of pool lighting choices on the market. Unlike conventional incandescent light, most of them use a lot less energy. LED lighting is one of the most popular options among pool owners. Not only will these lights provide your backyard pool with visual aesthetics, but they’re highly efficient as well. Another excellent option is solar lights that will work well at illuminating the pathways surrounding your pool.
—
This content is brought to you by Jeffrey Shine.
Photo: Shutterstock