By Dad, how do I?
.
.
I’m partnering with Lowe’s to celebrate all the amazing dads out there who have shown their families just how creative they can be when it comes to DIY projects. And as a little inspiration for your next DIY project, today I’m showing you how to build a simple bench with just a few materials!
This week, share your dads’ best creations with us on social using #DadBuiltThis and tag @DadHowDoI and @LowesHomeImprovement. We’ll be surprising some of these amazing dads with Lowe’s gift cards to help fuel their DIY creativity and keep them building! On behalf of myself and Lowe’s, Happy Father’s Day to all the amazing dads out there! We can’t wait to see what you’ve built.
Note: Always follow proper safety guidelines when operating power tools, including wearing safety goggles.
I will cover all of these tools eventually on Tool Tuesday.
The “chop saw” is really a compound miter saw.
Transcript provided by YouTube:
00:01
hey kids hey thank you so much for
00:04
uh your encouragement with the lowe’s
00:07
sponsorship
00:08
um i thought it was a good fit and fit
00:09
in right with my channel so
00:11
i was happy to do it and team up with
00:13
them for father’s day
00:15
to recognize some fathers out there
00:18
so remember to get your dad’s projects
00:20
in um with
00:21
uh dad how do i at
00:25
lowe’s home improvement and hashtag dad
00:27
built this
00:28
and throughout the next couple of weeks
00:30
i’ll be surprising dads with
00:32
uh some five thousand dollar gift cards
00:34
and then lowe’s
00:35
and its partners will also be surprising
00:37
other dads with uh
00:38
hundreds of gift cards so i got a bonus
00:41
video for you today
00:43
actually it’s going to replace my
00:44
thursday video because it’s a pretty
00:46
long video
00:47
it’s on how to build a bench um using
00:50
about
00:51
thirty dollars worth of materials um
00:54
it’ll be covering lots of tools so i’m
00:56
getting out ahead of
00:57
everything here a little bit um but i
00:59
wanted to produce this for
01:01
for lows for this weekend for this week
01:04
uh
01:05
so um we’re kind of getting ahead of
01:08
ourselves again on the tools
01:09
i’ll eventually cover them all in depth
01:11
but i kind of needed these tools for
01:13
this particular project
01:15
please remember to wear eye protection i
01:18
wear my glasses so
01:19
i’m covered but if you don’t wear
01:21
glasses wear eye protection
01:24
also be very careful i’m using a
01:26
compound miter saw in this video
01:29
um i call it a chop saw just for
01:31
simplicity’s sake but it’s really a
01:33
compound miter saw or just a miter saw
01:35
would usually do
01:36
as well so be very careful because those
01:39
saws can do you know they’re
01:41
meant to rip through wood so they can do
01:43
a lot of damage to other things too so
01:45
please be careful
01:47
i also want to uh call out my local
01:51
lowe’s manager marquise great guy
01:55
he’s just such a a great young man and i
01:58
wanted to recognize him because he’s
02:00
uh he gives me hope for the future just
02:01
a great young man
02:03
um and first i got a dad joke for you
02:05
too uh
02:06
that’s actually dad advice i would say
02:09
don’t trust
02:10
atoms they make up everything yeah
02:14
so on behalf of myself and lowe’s just
02:16
want to say happy father’s day to all
02:18
the amazing dads out there
02:20
and we can’t wait to see what you built
02:23
all right so here’s what the project’s
02:24
going to look like it’s going to be a
02:25
bench
02:26
fairly simple bench that way you can
02:28
just about anybody could do this with
02:30
limited amount of tools and there’s
02:31
different variations we could do on it
02:33
so i just need a one two by ten board
02:37
two by ten inch by eight and then one
02:39
two by four by eight
02:41
we won’t need that whole eight foot
02:43
board but um
02:44
and you’ll see how we’re going to do
02:46
that and then we need two brackets
02:48
and then two packs of these brackets so
02:50
those are the brackets i need
02:52
and then these are the the l brackets
02:55
that i’ll need two
02:56
two sets of them and you’ll see what
02:57
those are for and then some screws
03:00
if you can see those screws uh
03:03
i think i need about 12 of those and
03:05
then glue is good and then another
03:08
variation that we’ll want with this is
03:10
um you’ll use a dremel if you want to
03:12
you don’t have to it’s just another
03:14
added touch that we can use so i’m going
03:16
to go ahead and get started
03:19
okay so when you pick out a piece of
03:21
board you
03:22
what you really want to do um so this is
03:25
really rough
03:26
i went for that i’m actually okay with
03:28
it looking rough um because i’m kind of
03:29
going for that look
03:32
but when you when you pick out a piece
03:34
of board what you want to do
03:35
is you actually want to hold it like
03:37
this and look down it and make sure it’s
03:39
not
03:40
curved curve that way or curve this way
03:43
um
03:44
okay and then look at look at it that
03:45
way just make sure that it’s not
03:47
it’s not bowed because if you start with
03:49
a bowed piece of wood
03:50
uh you’re gonna be hating it so um
03:54
okay so i’m gonna go ahead and cut this
03:55
board over here i’ve got my two by
03:59
2 by 10 and then i’m going to cut
04:03
i’ll cut that one right after that so
04:04
i’m going to get a different angle for
04:06
you
04:08
okay so i’m getting ready to make my cut
04:10
and um
04:11
i’m going to cut two 16 inch pieces off
04:14
of this
04:15
six two 16 inch lengths okay and then
04:18
i’m going to want a four foot board
04:20
left over so i got plenty of wood here
04:22
so what i’m going to do
04:23
i’m going to cut this edge off just to
04:26
make sure it’s a nice clean edge first
04:28
then i’m going to measure 16 inches and
04:30
cut that
04:32
measure another 16 inches cut that and
04:34
then i’m going to
04:35
measure four feet right so 48 inches and
04:38
cut that
04:39
so i’m going to go ahead and do that
04:40
real quick
04:45
so here we go we’re going to go ahead
04:47
and cut 16 16
04:49
and 48 okay and here’s how you use this
04:54
saw and work from
04:57
front to back so we take it and bring it
04:59
all the way here
05:07
so there’s that i’m going to measure
05:12
16 inches
05:16
mark it
05:27
make sure you pay attention to which
05:29
side of that line we’re going on right
05:30
we want to make sure this is 16 inches
05:32
so we want to go on this side of the
05:33
line right
05:38
you can just set the blade down and
05:41
adjust it
05:46
okay okay we’re ready to go
05:55
okay next one
06:05
we need those both to be the same size
06:07
because those are going to be our legs
06:08
and we want it otherwise we’ll be
06:10
wonky right all right
06:33
all right so those are 16 now we just
06:35
need 48
06:37
for our bench this is going to be for my
06:40
daughter’s
06:41
uh bed she has a queen size bed it’s
06:45
60 inches across and she wanted it to be
06:47
just in just a little bit
06:48
so we’re going to make this one 48
06:51
inches
06:52
for our top
07:02
we can actually just flip this around
07:03
just make sure you go on the right side
07:05
of
07:06
the 48 inches and i’m using this too you
07:10
can see
07:11
um because the height the height of this
07:14
saw
07:14
and i think most chop saws like this are
07:17
uh
07:17
three and a half inches so this is three
07:19
and a half so you can use this as a nice
07:22
helper on this side put it over here to
07:24
support that other side right if you
07:26
don’t have somebody else to help you
07:28
so now
07:42
okay
07:44
okay that’s just a scrap so we got that
07:48
okay that’s our basic
07:51
bench and then now we’re going to cut
07:53
this board and we’re going to want it to
07:55
be
07:57
36 inches in between you’ll see where
07:59
it’s going to go i already know um
08:01
i already know the sizes so anyway it’s
08:03
going to be 36 inches
08:06
so let’s go ahead i’m going to cut off
08:08
one end
08:12
just so we make sure it’s a nice
08:14
straight edge
08:19
and when you’re using the chop saw too
08:21
make sure everything’s pushed up against
08:22
the fence
08:23
this is called the fence and make sure
08:26
it’s pushed up
08:27
clean against there and you hold it
08:28
against there
08:37
okay so now i’m going to cut this at 36
08:52
inches
09:01
okay i got all my pieces cut and we’ll
09:04
start assembling
09:05
um i may end up having to move that
09:07
inside i’m outside in my backyard um
09:08
because i don’t have a shop
09:10
uh so um so you probably heard the crows
09:13
chirping in the background but um
09:16
anyway so i will kind of build it from
09:19
here that’s
09:20
kind of a i wouldn’t say that’s the hard
09:22
part but and i think um
09:24
if we weren’t social distancing you
09:26
might be able to get those boards
09:27
actually cut if you don’t have a saw
09:29
or you could stop you could cut it by
09:30
hand right um
09:32
or um sometimes i think at lowe’s
09:35
they’ll
09:36
actually um cut it for you might have to
09:38
you know sometimes that can take a
09:39
little longer
09:40
you could also use like a hand saw a
09:43
hand circular saw to cut it
09:45
might not be as accurate as a chop saw
09:46
but again as we’re building your tool
09:49
um tool kit then you can decide what you
09:52
think you’re going to
09:52
get a lot of use out of but you might
09:54
just be able to use a circular saw
09:56
because that will help you you can rip
09:57
plywood with that and
09:59
yeah and you could use it for a chop saw
10:01
like this just might not be as
10:03
perfectly square like it would be with a
10:05
chop saw
10:06
okay so here’s roughly what we’re
10:08
building right so
10:10
here’s my legs and then i got that brace
10:12
that’s that 36 inch brace going in
10:14
between and then this is the top
10:16
and there’s so many different variations
10:18
we could do on this we could
10:20
we could use so there’s much i got these
10:22
brackets on the outside they’re going to
10:23
go here
10:24
um before we do anything though we’re
10:25
going to have to um
10:27
we’re going to have to sand
10:30
sand the wood down and so i just wanted
10:32
to show you what but what the final
10:33
product looks like
10:34
and like i was saying um so with that
10:36
dremel um you can
10:39
add um kind of some cool designs on it
10:42
and make it look like it’s beat up
10:44
and like i said with this board see i’ve
10:47
already got it it’s really rough
10:49
and that people are into that these days
10:50
where you want it to look like it’s kind
10:52
of
10:53
kind of natural and beat up instead of
10:55
you know perfectly straight wood so
10:58
um this is going to take me a little
10:59
while i’ll show you what what that take
11:01
what that um
11:02
or how to do it and then i’ll sand these
11:04
boards down before we come back together
11:06
and put this together
11:07
and then we’ll um and then you can even
11:10
stain it too
11:11
so it all it all depends on what you
11:13
want to do another thing we could do
11:15
depending on if you got the tools or not
11:16
right you could cut a notch in here
11:18
for the feet that’s kind of had to touch
11:20
i might do that
11:21
i’m just trying to show you you could
11:23
just do this and it’d be pretty cool
11:25
it’s pretty cool project but it all
11:27
depends on how far you want to take it
11:28
so
11:29
i’m probably going to take it a little
11:30
bit a little bit further just because i
11:32
have access to the tools
11:34
okay i’m getting ready to use my dremel
11:36
on this uh
11:38
and but i thought i’d show you this too
11:39
so i started to work this out and then i
11:40
realized i probably should show you
11:42
these are called side cutters and
11:45
they’re pretty handy this one’s this
11:46
one’s getting pretty old
11:48
but um anyway so this there’s a nail
11:51
that’s stuck in the side of this
11:52
and again you know we’re going for kind
11:54
of a rustic look anyway so it doesn’t
11:55
really matter but
11:56
um so it doesn’t matter that even that
11:59
the holes are there but that’s how you
12:00
pull those out they’re pretty
12:02
pretty easy to do that so so i’m gonna
12:04
go ahead and show you
12:06
um what i was gonna do with the dremel
12:07
because you can kind of rough it up i
12:08
already started right here where you can
12:10
kind of make it look like it’s
12:12
it’s rough even right even though it’s a
12:14
it’s
12:15
planed and looks good you can rough that
12:17
back up so it
12:18
and all you do i got a sandpaper
12:22
on the end here and then i just turn it
12:24
on and then they just start working
12:28
okay so we’re going to be using uh my
12:30
sander here
12:31
okay and i just want to show you how
12:32
that works if you’ve never done it
12:34
before
12:35
um basically sandpaper comes in a sheet
12:37
a meat and a half by
12:38
11 sheet i think is what it is and it
12:40
has different grits
12:42
so on the back it says p80 and what that
12:45
means is it’s
12:46
80 grains of sand per inch okay and so
12:49
when you get when you’re just trying to
12:51
do something rough you want to go
12:53
lower so like 80 or 60 or 40 if you’re
12:56
really trying to get stuff off
12:57
and then as you want to get if you want
12:59
to get it smooth you go on up so you go
13:00
120
13:01
200 400 is really fine
13:04
and so it gets a really smooth and for
13:07
this we just kind of want it to be rough
13:08
so i’m going to go ahead and use an 80
13:10
plus it helps to
13:11
you know if you’re using a fine
13:12
sandpaper it’s hard to get this stuff
13:14
off okay
13:15
so and how this works is you just
13:17
basically take it
13:19
if you don’t have a scissors you can
13:22
just bend it in fourths
13:24
okay
13:30
i’d have to bend it both ways
13:33
make sure you get a halfway decent
13:35
plankton does have to be perfect of
13:36
course
13:40
okay so we’re just going to rip it flip
13:43
it that way
13:46
and we fold it again
13:50
okay
13:56
okay rip that again
13:59
get it started and rip it
14:03
and that piece right there is meant to
14:05
fit on a hand
14:06
sander okay and with the way this one
14:08
this particular one works i probably
14:10
need to get a new one this one’s a
14:11
little bit old but
14:12
and a little cheap but it’s worked and
14:15
so i just keep using it until it dies
14:17
right
14:18
okay so there’s that and then all you do
14:20
is just
14:22
i think i want to start from the back
14:24
side so you just
14:26
stick it in here that’s the way this one
14:28
works other ones work differently but
14:31
and then you clamp it down okay
14:35
and i fold it over and then
14:39
same thing over here just tuck that in
14:42
in there
14:48
i might have to finesse it a little bit
14:49
but
14:51
get it to curl up inside come on
14:58
okay and then i got it and then i can
15:00
clamp it down
15:01
okay so now we’re good to go with the
15:03
sand and i’ll just kind of show you what
15:05
that is
15:05
um just to speed things up i’ll do this
15:09
on my own but i just want to kind of
15:10
show you what that looks like so let me
15:11
move the camera real quick
15:14
all right so here’s the sander and my
15:16
extra paper and basically i’m just gonna
15:19
let’s go ahead and show what that looks
15:21
like because you can see that see that
15:22
mark right there that paint
15:24
we’re gonna take that off
15:28
[Music]
15:34
okay much easier than trying to do that
15:35
by hand right um and another thing we
15:37
could do
15:38
rather than use the drum hole is we can
15:39
also use this on this edges to rough it
15:42
up
15:43
so i’ll do that too
15:56
okay so you can see what that looks like
15:58
we can play around with that so
15:59
i’m gonna go ahead and basically do all
16:01
these pieces of wood um before we
16:03
assemble it
16:03
um but i just kind of wanted to show you
16:05
what i was gonna be doing
16:06
and you know i might go ahead and sand
16:10
it
16:10
first and then i might even cut those
16:12
v’s in it so but i’ll i’ll show you when
16:14
i do that
16:14
okay so we got everything sanded down
16:17
and um
16:19
you know i added some notches too like i
16:22
said
16:22
with that dremel just to make it look
16:24
like it’s used a little bit
16:25
a warm or rough cut
16:29
and then you can see see where i’ve done
16:32
it here too put a big gash
16:33
in there it’s a little bit of work i’m
16:36
not gonna lie it takes a little while
16:38
you could use a belt sander or something
16:39
for this too um the dremel works really
16:41
well as long as you have
16:43
uh a good rough sandpaper you can get
16:46
through it
16:46
fairly quick see how the edge looks kind
16:48
of cool there too
16:50
so it’s like a good a good painting
16:53
though
16:53
you don’t want to do you don’t want to
16:55
overdo it because then it looks tacky
16:56
right so um so just play around with
17:00
that and you’ll get better at it as
17:01
as you go along um and then also
17:04
i am going to go ahead and cut a notch i
17:06
already cut the first one
17:08
um i got a notch in it so i’m going to
17:10
cut a notch in the bottom of this and
17:11
the way you do that
17:12
the easiest way is um
17:16
okay if you’re gonna be good at uh
17:18
woodworking you have to
17:19
gonna have to get good at fractions okay
17:22
because uh it does get a little tricky
17:24
so you’re gonna have to get pretty used
17:26
to
17:26
a tape measure and how it’s divided up
17:29
right so
17:30
so this is nine and a quarter
17:33
so quick tell me what’s half of nine and
17:35
a quarter four and five eighths very
17:38
good
17:38
very good so four and five eighths okay
17:41
so we wanna go right in the center four
17:43
and five eighths okay
17:46
and obviously you can do this however
17:47
you want but the way this is how i’m
17:49
going to do it though
17:50
i’m going to do a four and five eighths
17:51
that’s right in the center that tells me
17:53
where the center is
17:54
and then i’m going to go up from there
17:56
i’m going to go up four inches
17:59
okay and then from each side i’m going
18:02
to go in
18:03
three inches
18:11
this doesn’t have to be perfect again
18:13
we’re trying to uh
18:15
make it look a little rough so it
18:16
doesn’t have to be perfect but you want
18:17
it to be close
18:18
otherwise it’s gonna look bad so let’s
18:21
go ahead and draw a line
18:22
from the center up to that four inches
18:25
okay and then i’m gonna connect the dots
18:28
here so this is three running over to
18:33
there and the same thing here
18:39
okay that’s what our foot’s gonna look
18:41
like right so this is i already cut one
18:43
out just so you can see what it looks
18:44
like
18:44
i’m going to go ahead and cut this one
18:46
out and basically
18:48
i’m just going to use this this jigsaw
18:50
here um to cut that out right this one
18:52
happens to be a cordless
18:53
um fairly easy to use uh
18:57
and then you can use a corded one too i
18:59
think they probably have a little bit
19:00
more power but
19:01
anyway so i’m gonna go ahead and cut
19:02
that out
19:05
so be careful of your table right we
19:07
don’t want to cut into our table so
19:08
just cut right in here
19:17
so if you look close here i’m using the
19:20
dremel on this too again we want it to
19:22
kind of look rough i’d still need to
19:24
sand it but you can see how you can kind
19:25
of make it look like it’s a
19:27
a beat up piece of wood because that’s
19:29
again that’s real popular these days
19:32
okay so i’m gonna go ahead and finish up
19:34
this leg and then the other leg and then
19:36
sand it
19:36
and then then we’ll get ready to stain
19:39
it and
19:40
we’re getting close now okay
19:43
so um we’re getting close here um
19:46
but right in here it’s a little bit
19:48
tough to get with the
19:50
what i was the piece that i was using on
19:52
the dremel but that’s what’s cool about
19:53
the dremel
19:55
is you have all kinds of different tips
19:57
you can use
19:58
so i’m going to use this tip here and so
20:00
i can get down in that crevice
20:03
and clean that out good
20:12
see so that’s much cleaner and then now
20:14
i’m going to go ahead and sand it down
20:16
and then we should be good to go with
20:18
this one
20:21
okay so we’re getting ready to to stain
20:23
it
20:24
um i would highly recommend you pick up
20:26
some gloves because if you don’t you’re
20:28
gonna end up with
20:29
stained hands and it takes a little
20:30
while to get get that stain off
20:33
okay so i normally just like to wear
20:36
just some
20:37
latex gloves and then i just use a rag
20:41
and we’ll start with this one i already
20:43
i’m just playing around with it on one
20:44
of the other legs so
20:46
and it all depends on how much you let
20:48
it soak in
20:49
um to how dark it’ll be
20:53
so just kind of work it around
21:02
and what’s cool about this you could
21:03
pick a red stain you can pick uh
21:05
whatever stain you’d like to
21:09
change it to whatever color you’d like
21:10
so um
21:12
anyway this is pretty a pretty simple
21:14
process you want to go ahead and do this
21:15
this is just much easier before you
21:17
actually build the
21:20
build the bench because um if you go to
21:23
build the bench and then and you stain
21:25
it afterwards
21:27
um then your you know the holes and that
21:29
sort of thing you’re working around your
21:30
brackets
21:31
it’s just harder it’s so much easier if
21:33
you just go ahead and do this first
21:34
so all right so i’m just going to go
21:36
ahead and finish this up just stain all
21:38
these different pieces
21:40
um before we assemble them so
21:45
obviously that’s fairly simple um the
21:47
one thing you want to remember when you
21:49
when you’re staining though this uh the
21:51
rag can be flammable
21:53
so when you’re done don’t throw a pile
21:55
of rags in a garbage can
21:57
um because they can actually ignite so
21:59
you want to after you’re done with this
22:01
you just lay out the rag
22:02
okay and let it dry out all right so
22:06
i’ll go ahead and finish
22:07
staining these and then we’ll uh and
22:09
then we’ll just put it together
22:12
okay so i’m just about done staining um
22:15
i’ve got a few stained drops on my
22:19
nice shirt so don’t wear a nice shirt
22:21
when you’re
22:22
when you’re staining but i wanted to
22:24
keep it consistent i didn’t want to go
22:26
change my shirt
22:26
so oh well um
22:30
don’t do that though right don’t wear a
22:31
nice shirt when you’re staining so i’m
22:32
just about ready
22:33
just about done and then you just kind
22:35
of want to let this dry for a little bit
22:37
so
22:38
um see i’ve already stained all those
22:40
pieces
22:41
um and then i’m just wrapping up this
22:43
one
22:48
so so this is you know again it’s just a
22:51
two by ten
22:52
fur piece um but when it stains up it
22:55
looks
22:55
and that’s just a regular 2×4 and i
22:57
picked out uh
22:59
i picked that one that was looking rough
23:00
i think i showed you that earlier
23:02
so it looks like it’s um
23:05
like it’s rough cut almost and see how
23:07
it got some stain to it it looks pretty
23:10
and that was a pretty cheap piece of
23:11
board i think it was like three bucks
23:15
and i think this this whole two by ten
23:18
board was like
23:19
eight bucks right so this is a fairly
23:21
inexpensive project those brackets were
23:24
uh you know probably total probably
23:26
spent less than 30
23:28
on this bench um so anyway i’m just
23:30
going to go ahead and finish the stain
23:32
in
23:32
and then cap it and then i’ll uh
23:36
lay out my rag like i told you before
23:38
and then we’ll uh we’ll come back and
23:39
assemble it
23:42
okay okay so we’re back here
23:45
we’re getting real close now right we’re
23:46
gonna add the brackets um but we want to
23:49
make sure our legs are
23:50
centered okay so the top was 48 inches
23:53
if you remember right 48 inches this is
23:56
36 inches
23:57
okay and these are each inch and a half
24:00
inch and a half an inch and a half
24:02
okay so inch and a half plus inch and a
24:04
half is
24:05
three inches plus 36 is 39
24:08
right minus 48 what is that
24:12
nine right right 48 minus 39
24:17
is nine okay i have to think about it
24:19
myself
24:20
um so half of nine is
24:24
four and a half okay so basically we
24:26
want to do we want to
24:27
come in from each side four and a half
24:29
and it should put us right in the center
24:32
again it doesn’t have to be perfect
24:33
because this bench is fairly rough
24:35
but four and a half and then
24:39
cheat that over
24:44
so that’s basically four and a half so
24:46
so there we go okay
24:47
so that’s where we’re gonna be and then
24:49
we’re gonna put this bracket
24:51
um this bench again is for my daughter i
24:54
asked her if she wanted
24:55
because you could paint these brackets
24:56
too right if you wanted to you could
24:58
take them aside and paint them whatever
25:00
color you want she said um just to keep
25:02
them
25:03
the silver is fine so so this bracket’s
25:05
going to go on this side
25:07
okay this bracket will go go on this
25:10
side
25:12
and then we got
25:16
these l brackets okay got these l
25:19
brackets and they’re going to go
25:21
like that like that
25:26
like that and like that
25:29
okay but we want to make sure that’s in
25:31
the center too so we got to take a few
25:32
measurements just to make sure that’s in
25:34
the center
25:34
and then what i’m going to also do is
25:36
i’m going to i’m going to glue this
25:38
okay and then i’m going to actually
25:40
before i put these outside brackets on
25:42
i’m actually going to put a couple
25:44
screws into here
25:46
okay because we want that to be solid
25:48
and then this
25:50
will be glued and then these will hold
25:52
that all together because we don’t want
25:54
any
25:54
screws coming from the top right because
25:57
another way we could do this is we could
25:59
from the top put screws down into here
26:01
and that would hold it too
26:02
but we don’t want the the screws showing
26:05
on this particular bench you could you
26:06
could um put
26:08
put the screws in sink them down a
26:09
little bit and then you could put
26:11
cut a dowel and stick that dowel down
26:13
inside there that looks kind of cool but
26:14
we’re trying to keep this
26:15
fairly simple like i said i mean i i’ve
26:18
added these cuts to it
26:19
um on the legs you don’t have to um
26:23
yeah so and i did the dremel to it right
26:25
i’ve sanded down so you don’t have to do
26:27
that you can keep it real simple i’ve
26:28
stained it you don’t have to do that
26:30
so it’s however elaborate you want to
26:33
make it
26:36
okay so here’s what i did i ended up
26:38
marking this board
26:40
so i knew where i was gonna um
26:43
where i was gonna put that board right
26:45
so it just makes it that much easier
26:47
and then uh we’re gonna go ahead and put
26:50
glue
26:52
on here and then put that there and then
26:55
i’m going to drive
26:56
a couple of these screws
27:00
these are really nice screws because
27:01
they’re coated okay
27:03
and you want to make sure we’re going
27:04
through it and a half and we want to
27:06
make sure we get a bite there right so
27:08
we’re gonna
27:09
uh this is i think these are three
27:10
inches maybe even three and a half
27:12
inches but
27:13
the nice thing about them is they’re
27:14
coated and they drive right through like
27:17
butter
27:18
if you use this type of screw
27:21
which we’re going to use on some of the
27:23
smaller brackets because they need to be
27:25
shorter
27:26
um they’ll they squeak and make all
27:29
kinds of noise
27:30
right so um anyway you’ll see that this
27:32
thing drives right through so
27:34
i’m gonna go ahead and do one side and
27:35
then i’ll do the other side and i’ll
27:36
show you
27:38
okay so i’m gonna go i went ahead and
27:40
put a couple dots here to tell me where
27:42
i’m gonna put those
27:44
uh screws okay so i’m gonna go ahead and
27:46
start those i’ll just make it that much
27:48
easier when i go to
27:50
when i go to put it in the side there if
27:52
i already got them started
27:54
it doesn’t have to be exactly on those
27:56
dots it just kind of it’s got to be
27:58
somewhere close okay
28:05
see nice so i’m probably gonna go up a
28:08
little higher than where i put that down
28:19
okay um i know that i have this is three
28:22
and a half inches here
28:24
so i know i have three and a half inches
28:26
so so i’m good
28:28
right okay so now we’re gonna put some
28:30
glue on this
28:36
okay so i went ahead and put some glue
28:39
some glue on this edge
28:40
okay and now we’re gonna go ahead and
28:43
set this
28:44
guy up here and i’ve got that marking
28:46
like i said
28:47
right showing where that’s going to go
28:50
so
28:52
you’re going to be able to see this
28:58
okay so we’ve got that
29:02
and we’re gonna just press that up tight
29:06
now we’re finishing those screws all the
29:09
way in
29:15
okay
29:24
okay that’s that side we’re going to do
29:26
the same thing to the other side
29:28
okay so we’re on the back side of the
29:29
other one i’m just going to show you
29:30
what that looks like from this side
29:32
um i’m making sure on this side that
29:34
everything is lined up
29:35
right on this side i’m making sure
29:37
everything’s lined up with those
29:38
lines that i put so then you just hold
29:41
it tight i put glue on that
29:42
and then we do the same thing here again
29:51
okay same thing here
29:59
okay so before we put this the legs on
30:02
we want to put
30:02
glue on it okay so we’re going to go
30:04
ahead and put some glue
30:07
here across this
30:10
racket running across
30:14
and then here
30:17
okay now we can flip it over and we know
30:20
we want to have this four and a half
30:21
inches
30:22
from here so we want to be close since
30:24
we already put the glue down
30:26
we want to make sure we’re close when we
30:28
put when we flip it down right so we
30:29
don’t have glue where we don’t want it
30:31
to be so roughly there
30:32
doesn’t have to be perfect again so now
30:34
i’m just going to take it i’m going to
30:35
flip it over
30:38
i can see my little mark there
30:42
right perfect okay so now
30:46
four and a half inches we want to make
30:47
sure we’re four and a half inches right
30:49
like we talked about before
30:51
so i need to slide it a little bit more
30:53
this way
30:55
okay four and a half again doesn’t have
30:58
to be perfect but we want to be close
31:00
okay so now we’re putting that guy there
31:02
and the bracket is
31:05
i want that middle hole to be at four
31:07
and five eighths because this is nine
31:09
and a quarter so four and five eighths
31:11
again doesn’t have to be perfect but we
31:13
want to get close
31:14
okay so i’m gonna go ahead and put down
31:23
one we’re not going to um screw this
31:25
completely together yet
31:27
um we want to get it close and you’ll
31:30
see why
31:30
because you want to make sure everything
31:33
on the other side too
31:35
so we’ll make sure things are flush here
31:38
okay
31:44
okay
31:47
okay i’m probably gonna put one more
31:48
screw in here
31:50
just to hold it
31:57
but then we’re gonna go do the same
31:58
thing on the other side
32:00
okay so just flip the bench around just
32:02
to make it easy and i’m just going to
32:04
go ahead like we talked about we’re
32:05
going to go ahead and just put in a
32:07
couple of
32:08
screws here probably do this one here
32:15
okay go ahead and put
32:20
one here and make sure the bench is
32:22
tight down
32:26
okay and then
32:29
one more here and just make so i’m
32:32
pushing on this
32:33
on this middle brace here pushing down
32:35
making sure everything stays flush
32:36
right
32:39
okay i think i can just go ahead and
32:41
bypass that one because there’s another
32:43
screw right there so i’m not going to
32:44
worry about it let me grab a couple more
32:48
screws so we’ll finish this one off
33:02
[Music]
33:04
okay i can flip it around i don’t want
33:06
to put a whole lot of pressure on those
33:08
brackets yet so make sure you just
33:09
support
33:10
it from the bottom flipping it around
33:13
everything looks pretty good um
33:18
now we’ll go ahead and put these last
33:20
couple of
33:21
screws in
33:31
[Music]
33:34
okay we’re getting there we’re almost
33:37
done
33:38
so now we’re just going to put a bracket
33:40
here
33:41
bracket here bracket here and bracket
33:44
here
33:44
and we are done so um
33:48
let me measure those out okay so i’m
33:50
just about done um and the way i’m
33:52
spacing these out is i got
33:54
it doesn’t really you know again this
33:55
doesn’t have to be perfect you could put
33:57
them here and here
33:58
the only thing is is if you um if you
34:01
put them right
34:01
directly across from each other then
34:03
they’re gonna the screws are gonna
34:05
bump into each other right if i put this
34:07
here and this here and i put the screws
34:08
in they’re gonna run into each other so
34:10
you just wanna offset them a little bit
34:12
um so i got these ones coming in
34:16
uh let’s see let’s do that at six and
34:18
we’ll do that one at six
34:21
and then we’ll just offset the other
34:22
ones a little bit on the other side
34:24
okay so let’s go ahead and screw those
34:32
in
34:40
okay
34:45
and again i like to put a few screws
34:48
in and then work my way around and then
34:49
come back and finish them up
34:51
so you’re not
34:55
don’t put all the screws in this one
34:57
because then you might not you might
34:58
need to
34:58
wiggle it or something so it’s good to
35:00
just put a couple there a couple here a
35:02
couple there and then go back and then
35:03
finish it all up
35:05
um if you’ve ever put them together put
35:06
together something uh like a cabinet or
35:09
something
35:09
they always want to kind of leave stuff
35:11
kind of loose
35:12
until you um then go back and tighten
35:14
things at the end because it makes it
35:16
much easier rather than
35:17
tighten this side and then this side’s
35:18
loose and then you’re trying to reef on
35:20
it to get it to line up so
35:21
i’m gonna go ahead and finish these up
35:23
and then what we’ve just about done
35:31
okay we just about wrapped it up here
35:37
there you go
35:40
how about that you’re uh you’re in
35:43
business so
35:44
um we’re gonna go ahead and what i’d
35:47
like to do i think
35:48
and you always want to do this when you
35:49
make a project is uh
35:52
sign it you know make sure to sign it
35:54
and date it and
35:55
so that you know it went down
35:58
years down the road people were
35:59
wondering who who made that
36:01
um they know that uh it was made by
36:04
a relative so it’s kind of cool to do
36:06
that so like i said i’ll just sign it
36:09
um because i mean this for my daughter
36:11
i’m just gonna say to
36:12
christine love you dad um
36:15
and then the date so there we go so
36:19
um hopefully you’ll feel like you can do
36:21
that too
36:22
it’s a fairly fairly simple project but
36:25
it looks pretty cool and this will be um
36:27
for the bottom
36:28
or at the end of her her bed so okay
36:31
you got this all right so i hope you
36:33
learned something uh or how to build a
36:35
bench if that’s something you’re
36:36
interested in doing and just a few
36:38
different variations on
36:40
it so i just want to again encourage you
36:43
to
36:44
to go out and try something that maybe
36:46
you’re a little uncomfortable with
36:47
be careful with that compound miter saw
36:49
and your fingers
36:50
right so be very aware of that if you’re
36:52
running machines like that you know
36:54
you’ve got to be very respectful of that
36:57
of that saw because it’s ripping through
36:59
wood it’ll rip through
37:01
other things just as easy or if not
37:03
easier so
37:04
please be very careful when you’re
37:06
dealing with stuff like that so
37:08
uh all right i just wanted to wrap up
37:11
and say you’ve got this
37:12
i’m proud of you and on behalf of lowe’s
37:16
uh happy father’s day to to all the
37:18
fathers out there and
37:20
we can’t wait to see what you built or
37:22
what your dad built
37:23
thank you
—
Don’t like ads? Become a supporter and enjoy The Good Men Project ad free
This post was previously published on YouTube.
***
You Might Also Like These From The Good Men Project
 |
 |
 |
 |
Join The Good Men Project as a Premium Member today.
All Premium Members get to view The Good Men Project with NO ADS.
A $50 annual membership gives you an all access pass. You can be a part of every call, group, class and community.
A $25 annual membership gives you access to one class, one Social Interest group and our online communities.
A $12 annual membership gives you access to our Friday calls with the publisher, our online community.
Register New Account
Need more info? A complete list of benefits is here.
—
Photo credit: Screenshot from video
